To prepare the surface for applying the painting composition or cladding with various materials, it is customary to use special compositions. They allow you to level the wall and make it perfectly smooth. This process is not complicated, but if you need to get a high quality result, it is better to entrust it to professionals. This type of service is ready to provide a large number of different organizations operating in this area. Plaster work can be carried out independently, in the presence of minimal skills and patience, since the process implies a multiple repetition of the same actions. Work in this area is carried out in several stages.
Plastering: the necessary composition
To start plastering, it is necessary to purchase the necessary composition for this. This is a rather difficult choice, since modern industry is ready to offer the consumer a huge number of options. To narrow the search range, you need to take into account several factors. The most important thing is the place of work – outside or inside the building. No less important is the type of surface: wood, concrete, brick or any other. If you feel difficulty with choosing a composition, you should contact a consultant. They are present in almost all stores selling building materials. Additionally, plastering work is divided into two large groups: for primary application and finish. Differences are in the special characteristics inherent in each of these options. The finished putty can be applied to the surface with only thin layers, otherwise the quality of the result will significantly decrease.
The next step is the direct application of the composition. For this there is a special tool – a spatula that is a rectangular sheet of metal with a flat work surface and a handle. Application should be carried out only after the last layer has dried to ensure the maximum clutch coefficient. To check the smoothness of the surface and its evenness, the building levels are used. They provide the possibility of adjusting. If the wall cladding is carried out with tiles, a high level of evenness is not required. The reason for this is the fact that the product is attached to a special adhesive, evenly applied to the surface and smoothing it out.
Wall cladding: a popular type of work
This type of work as wall cladding is quite common and is widely popular. All varieties of ceramic tiles, natural stone or tiles can act as the material used. This method allows you to radically change the appearance of the interior or exterior of the building. Some types of materials created for these purposes have a high cost and complexity of installation. This applies, for example, to natural stone. It has an aesthetic and presentable appearance. There are a large number of products that successfully simulate it and have an affordable cost.
Когда облицовка стен производится с внешней стороны здания, к используемым изделиям предъявляется несколько важных требований. They should effectively resist negative external environmental factors. If such requirements are not met, the product will lose its appearance and begin to gradually collapse. Когда осуществляется облицовка пола, необходимо наличие высокой механической прочности. The product should not only withstand human weight, but also static loads from the legs of furniture.