The modern building materials market has long been saturated with ready -made models of various platbands. You can choose the desired platband of any size of suitable material, pattern and decorated in any color scheme. But even at home there is a real, practical possibility of making wooden door platbands that will not give in to the quality of ready.
For the manufacture of door platbands, special tools are required.
Gols are made using standard woodworking machines. These include: sawmills for black blanks, fugitive machines for output of the plane of the board, flight to adjust all the blanks to one size.
For all types of such works, manual electric machines are used. First of all, it is a lobby that is used for processing and milling the front surface of the platband. With the help of curly cutting knives and cutters, you can create the desired decorative pattern. All the finished workpiece is polished using an electric grinding machine.
Only a specialist who is familiar with the basic principles of work on such machines can competently make a good platband. Here it is necessary to carefully observe safety precautions and a person who had never been to work with such tools before, it is unlikely that it will be possible to make a similar item.
The technology of manufacturing wooden platbands consists of several stages.
First select a suitable wooden board for the main workpiece. It should be normal and specific bluish spots should be absent on it. If there are such spots on it, then when drying this material, violations in technology were committed. Subsequently, it is very difficult to eliminate and hide them with paint. In this case, the board should be even as possible, there should not be large knots on it. Particular attention is paid directly to the direction of the wood fibers. After coloring, the direct fiber looks much better. Although some clients may like a direction at different angles.
Further actions are in the cut of ready -made blanks, taking into account the optimal size and in their further processing. In order not to leave chips and other defects on a wooden surface, the tools must be pre -prepared. They should be in very good working condition. The cutting surfaces of the knives must be sharply sharpened.
At the last stage, to give a “product species”, they are grinding the platbands. First they are roughly processed with an electric grinding machine. Then manually is polished in the direction of the fiber with a fine -grained, sandpaper. This gets rid of those circular scratches that an electric machine can leave.
These are the main points that usually pay attention to in the manufacture of wooden door platbands. Then proceed to the process of their fastening.
