The construction market today offers a wide variety of materials for wall lining and roofing.
Some of them – such, for example, europrony and imitation of a bar – use traditional solutions, since these materials are based on a tree used by mankind for construction purposes for many thousands of years. Other materials, on the contrary, could not even theoretically appear more than half a century ago, since their manufacture is based on the latest technologies. In particular, all kinds of polymeric materials can be attributed to this group – from siding to foam plates and heater.
And finally, there are materials in which the old combines with the new. For example, the metal tested for centuries provides reliability and strength, and polymer and other anti -corrosion coatings guarantee durability and aesthetic appearance.
It is this group that includes corrugated board and metal tiles. Their basis is metal – most often, galvanized steel. However, both corrugated board and metal tiles have a number of special properties that give them a lot of advantages over ordinary sheet iron.
The first feature of corrugated board and metal tiles is the profile. Both are corrugated sheets of metal, and their wave -like profile, first of all, increases the rigidity and strength of the material while reducing weight. Thanks to its profile, corrugated board and metal tiles are exceptionally light, and at the same time very strong.
In addition, the corrugated profile allows the most optimal way to organize the drain of water coming with atmospheric precipitation, and it is thanks to this feature that corrugated board can be widely used in roofing. And the metallocerepits, in fact, is intended only for him.
However, here in the use of corrugated board and metal tiles there are some differences.
The corrugated board is best suited for those roofs where the appearance is of less value compared to functionality and cheapness.
The corrugated board is characterized by ease of installation, and in addition, due to the characteristics of manufacturing technology, it is cheaper than metal tiles. After all, corrugated board are large sheets of galvanized steel, rolled on a special machine to obtain a specific profile.
Corrugated board may not even have any special coating at all. True, this type of corrugated board is used mainly for temporary structures. For example, fences from corrugated board without covering, which are installed around the construction site, are very cheap.
Corpusive corrosive coating should have an anti -corrosion coating. And the metal tile has such a coating always and usually it is a polymer coating, which, along with functional, also pursues aesthetic targets. The polymer coating of the metal tile allows you to widely vary the color scheme, which is especially important in those areas where the appearance is no less important than functionality.
One of these niches is low -rise housing construction. Here the metal tile is quoted as one of the best materials for the roof.
The corrugated board is much more broadly used in areas such as industrial construction and construction of rapidly vested buildings (for example, shopping centers and large entertainment facilities. Moreover, one of the most important advantages of corrugated board over a metal tile is its multifunctionality.
If the metal tile can be used only to cover the roof, then the corrugated board has much more.
One of them is the construction of fences and barriers – we have already mentioned. But a much more important sphere of use of corrugated board is wall lining.
If it is preferable to use a special roofing corrugated board for the roof, then any. It all depends on the goals and objectives of the project.
For example, industrial facilities – workshops, hangars, warehouses, depot – can be sheathed with unpainted corrugated board without a special coating. Or, if it requires a corporate style – a corporal stained in corporate colors.
Image, rapidly vegetable objects – such as shopping centers, hypermarkets, covered markets, car dealerships, entertainment institutions (night clubs, casinos, sports complexes) and the like are usually sheathed with painted corrugated board or corrugated board with polymer coating.
The corrugated board can be considered the ideal material for the rapidly vested buildings, since it is cheap, mounted quickly, and serves for a long time. And it was these qualities that were made by corrugated board one of the most popular building materials in Russia.
