Creating a project of a warm water floor system is not easy. When calculating consumables, it is necessary to take into account: the height of the room, its shape, size, purpose, purpose, purpose, purpose, purpose, purpose, purpose. And in order for the system to function correctly, it is necessary to pay close attention to the area of glazing, the characteristics of pipes and other materials, etc. D.To date, there are specialized computer programs that will conduct an accurate calculation for the required number of materials, styling steps and much more for a certain time.
Hydraulic resistance is obtained based on the diameter of the pipe. To calculate the right number of coils, take the parameters of the area of the room, the length of the pipe, which should not exceed 120 m, to the heat loss of the rooms.
It is also important to take into account when designing the location of the dividing (compensation) seams located between the heating plates. If this is missed, then cracks may appear on the surface, protrusion due to temperature extensions and shrinkage. Compensation seams must be used if:
– into a room with an area of more than 40 m.;
– along the edges of the screed to compensate for the expansion;
– if the length of the concrete slab is 8 m;
– in the doorways;
– above the seams of supporting structures;
– If a complex floor configuration.
When they create a seam placement scheme, pay attention to some factors. Pipes should not cross the deformation seams on the laid circuit. The exception can only be the supply pipes. In places where the pipe intersects with a seam, it is placed in a corrugated pipe, while retreating 20 cm on each side. If the flooring is solid (tiles for the bathroom, for example), then the seam rises to the surface of this gender.
And in the end, when designing, it is important to know which floor covering will be used. This is necessary in order to choose the necessary materials for the floor and thereby ensure the correct temperature of the coolant. It will not hurt to find out how furniture and plumbing will be located. Since in these zones the pipes do not need to be laid due to the fact that the tree is not resistant to change of temperature. Simply put, the installation of a warm floor under the bathroom, the cabinet is simply inappropriate. No effect from this. Only extra costs.
