Secrets of installing an interior door in a bar house

Interior door is one of the most important interior elements. Correct installation and choice of suitable design will help make it a beautiful decoration of the room. When choosing a door, you should pay attention not only to its beauty and aesthetics, but also to practicality. After all, the operation of the door implies its opening and closing for decades, and in order to achieve such an effect, certain rules must be followed when installing it. Even the most expensive and high -quality door with incorrect installation is not able to bring anything but disappointment. Installation of the door in the house from the beam includes several stages. Observing all the rules and phased, you can achieve good results. The first stage is the dismantling of the old door. Prepared and cleaned the opening. Next, check the new door for defects, if everything is in order, you can proceed directly to the installation. The next step is the assembly of the block. You should decide which way the door will open and depending on this to outline the place for installing the loops on the vertical part of the meadow. With proper installation, the loops should be at a distance of no more than 20 centimeters from the upper and lower edges. Then the grooves are selected. Their depth should correspond to the thickness of the loop. Next, holes are made for screws. The third stage is the installation of the unit. It is fixed with screws. Then, when the doorway is ready, the door is invested there. Everything is set in level, in order to avoid further misunderstandings. The loop is fastened with screws. It should be noted that the gaps between the beam and the door should be exactly 4 mm, the smaller gaps can cause risk in further operation, and the large ones will simply look ugly. The fourth stage is the elimination of the formed gaps between the wall and the beam. This is done using consoles made of wood and mounting foam. When using foam, you should ensure that it does not fall on the elements of the door, since its complete elimination from this surface is impossible. It is also necessary to pay attention to the fact that the foam has the ability to expand, so its volumes must be dose. The next stage includes the installation of the lock. As a rule, the door handle is located at a height of no more than one meter, so the lock itself is installed slightly below. The final stage is the installation of platbands. Their installation should be done only after the foam is completely dry. After the correct implementation of these instructions, the interior door should function in accordance with the requirements. Summing up, we can say that such a process as installing a door in a house from a bar is not as difficult as it seems at first glance. If you follow all the rules, then in the future problems with their operation should not arise. Thus, interior doors will be able to last more than one year without losing their original qualities.