The wardrobe has many advantages and it will be the most relevant in apartments where there are not so many places as this would like this. These include all apartments of the old type of Brezhnev and Khrushchev times. However, the wardrobe can be a great solution when you just want to unload the room, for example, a children’s room, from excess furniture. The main advantage of such a cabinet is its doors, which during the opening are shifted to the side and do not require additional space to open. It is not only very convenient, but also modern. Well, if you make such a closet with your own hands, it will be not only a memory, but also a good saving of money. You can use chipboard as materials, this is a good and high -quality material, which costs relatively inexpensive.
Plan for work
It all starts with a sketch. You need to think through the design of your cabinet. The most economical and simple model will turn out if the role of the back wall and one of the side walls will play the walls of the room itself. Be sure to take into account the thickness of the chipboard panels. Next, find the company that will cut them and deliver them to the house. In addition, it is necessary to purchase fittings, latches, handles, loops and so on, as well as screws and wood carpet glue. Also, initially you should decide on the color of your future wardrobe. The opening door block is best to buy separately, it will cost not so expensive, but you will save yourself from many problems that may arise in the manufacturing process.
Collection of a wardrobe
In skirting boards you need to make cuts and fit the panels to the walls close. Fastening to the walls is carried out using corners of metal and self -tapping screws. Further, the ceiling of the cabinet is attached to the walls and panels of the chipboard. Remember that all work should be done in level, you need a square, roulette and level from measuring devices. Between themselves, the elements of the cabinet are not only twisted using bolts, but also glued, this will provide maximum reliability and strength of the connection.
Installation of shelves and doors
The shelves are installed on special mounts in the side and rear walls of the cabinet. Doors can ride along hinges, the upper part of which is installed on the top panel of the cabinet, and the lower one on the floor. It is worth leaving a small gap to be able to clean the floor. Also put the stoppers with a rubber lining to avoid the door beating during their full opening. The doors must be adjusted so that the move is soft, and the closing with dense.
External design
It is important that your wardrobe is not only functional, but also beautiful. The wood must be cleaned, covered with olifa and then painted with special paint to the color of wallpaper and walls in the room. The cabinet should look harmonious. All mounts must be hidden by decorative wooden elements, screw the handles and other fittings. Inside the cabinet, all bolts and fasteners are also closed with special decorative plugs that can be bought in any furniture store. Work on painting the cabinet should be carried out by observing safety regulations. The room should be well ventilated, it should work in a respirator and gloves, since the ingress of paint on the skin and its fumes in the respiratory tract is not recommended for health. Before you start using it, the cabinet should stand for a certain time so that the paint is completely dry. Such a cabinet will last you for a long time and will delight your eye, performing your functions one hundred percent.
