DVP – universal material for finishing.

Wood and fiber slabs, or just fiberboard-is a sheet material that is based on the method of hot compression, followed by drying of the carpet from wood fibers. At the same time, special binding resins and special additives can be introduced into the fibers to regulate the mechanical and chemical parameters of the material. It is possible to purchase DVP in Lipetsk, Kursk, Tver and other cities at special warehouses or in construction stores, which often present a wide range of products of domestic and foreign production. Dvp wood of wood fiber is considered an excellent material for lining surfaces, as well as for facing frame partitions, ceilings and walls of residential premises. Pets can also actively use this material for their own purposes. DVP is considered indispensable in the process of laying floors. In this case, it will serve as a delightful laying layer. FEP is actively used in the production of office furniture, household items, built -in cabinets, carpentry structures and other products. It is actively used in car construction, automotive industry and construction. There are two main methods of production fiberboard – this is wet and dry. The wet method involves the absence of any binder; The dry method requires the introduction of synthetic resin into the small wood. Wood-fibrous slabs are divided into such types: hard, super-hard, semi-hard, insulating and insulating and final. They are designated respectively: solid – t, superhand -hard st. p. All sizes correspond to the generally accepted GOST 4598-86. Fiberboard, which were produced by a wet method have a density of 850 to 1000 kg/cube. m, while their thermal conductivity is 35-40 m*s. The strength of such a sheet is at least 0.13-0.15 W/MPa. The main advantage of such sheets is their large length, which greatly simplifies and reduces the cost of work related to the installation of structures. GOST for determining other parameters is the same as for dry DVP plates. High -quality DVP sheets in Lipetsk, Belgorod, Tver, Kursk can be found from domestic and foreign manufacturers. This building material can be used as a reliable assistant with soundproofing and thermal insulation characteristics. It will perfectly serve as the basis for a variety of partitions, ceilings, ceilings between floors, roof heater (especially for wood structures), acoustic decoration of special -purpose premises (recording and radio studios). A wood plate, which is produced by a dry continuous method of production, has a limit for a bend of up to 40 mp, and its density ranges in a range of 8520-950 kg/cube. m. Such plates are actively used in building and furniture structures that are protected from moisturizing. Special decorative plates and DVP sheets are designed for use in the furniture industry, for the manufacture of door and wall panels. The source material in the stoves of the new generation is a tree that is not only processed by cutting, but also in the literal sense of the word “soaked” to individual threads (fibers). When the cut woody mass passed through the waves, then very thin fibers appear with a thickness of up to 0.1 mm. They are mixed with glue, then compressed and hardened at a very high temperature. As a result, the surface of the resulting plate is supplied to the grinding machine and processed. In some cases, a special coating is applied to the surface, which exactly repeats the texture of the tree. Dvp -fiber slabs in Lipetsk and other Russian cities are used in all types of construction work. With the varnishes of the fiberboard can be used as finishing material in the construction of public, industrial and residential premises, the manufacture of trade equipment, vehicles, furniture, door leafs and other structures. DVP is an excellent material that has a multifaceted functional purpose and at the same time is inexpensive. The cost of the product depends on its size, type of production, the presence of special characteristics, etc. p. The basis of the long -term use of DVP plates is complete compliance with all operating conditions for which the material is designed.