The main task of finishing the basement of the building with siding is to protect its foundation and the grounds from aggressive environmental influences. This is a very responsible process on which the duration of the building for its intended purpose depends. Correctly executed finishing the base of the facade with siding will save the house from temperature differences, spring water and rains. Siding, among other things, for a long time gives the structure an aesthetic and neat look.
Basile siding in Lugansk is made of high -tech modern materials such as polypropylene. Its difference from ordinary vinyl panels is as follows:
Large selection of surface texture. There is an imitation for wood, stone or facing brick, there are ordinary single -color panels. In addition to the color, the surface of the panel transmits the relief.
Basement siding differs from ordinary facade increased resistance to external influences. He is shocking, lends itself little by an alkaline environment and gusts of wind. All this is due to the fact that basement siding is three times thicker.
The main characteristics
The material is extremely durable, does not burn.
Does not lend itself to decay and corrosion without additional processing.
Does not lose properties at large temperature differences – in the range +50…+60 ° C
It has the properties of the ventilated facade: passes the air and removes condensate.
Advantages
Basement siding can be used for different tasks, thanks to the variety of its forms. It can be used both inside and outside the premises, it is combined with other types of facade finishes.
Since siding was developed specifically for operation in an aggressive environment, when washing it, you can use cleaning liquids. After that, the plastic shines like a new one and will not change the color, does not pour out in the sun. In addition, this is helped by a special film, which is covered with the surface of the panels.
And he is also easy.
The process of finishes
Siding can be installed at any time of the year. The process is quite simple and even a non -professional is possible. No special preparation of walls is required, just follow the instructions and approved work plan.
The panels have dimensions ~ 100 × 45 cm. You can install them both vertically and horizontally. Siding is attached to the crate attached to the facade using self -tapping screws, then the panels are interconnected by special latches. Due to small weight, this design is quite reliable.
