Decoration of the front door

It is no secret that the front door is the face of the apartment, she is always intended to be in sight, covering the comfort and warmth of the family’s home, which is just necessary to take care of its strength, appearance. In this article, we will introduce you to the most often selected facing materials for the entrance doors from steel.1. Vinyl skin is the material that is moving in appearance to artificial skin. This is a very common version of the door finish, because it combines high quality and very low costs for its finish. You can use vinyl skin in different ways: – by pasting – directly on the metal metal itself or on the upper layer of insulation; – fixing panels made of vinyl leather, which is considered a time -consuming and costly option, which implies the cladding with panels, the method of nailing them to the door using decorative nails; – the door sheathing with decorative nails or large buttons around the entire perimeter of the door, by giving a certain geometric pattern of upholstery. In this case, the use of vinyl skin is recommended the use of insulation, which gives the door the visual effect of the “blow” of the material. The use of vinyl skin has a number of advantages: strength, durability, increased wear resistance, good heat – and sound insulation, very acceptable price, lightness and speed of decoration. The disadvantages of vinyl skin can be called – weak protection from unexpected cuts, zero fire resistance, and, therefore, insecurity before vandalism.2. Laminated panels. This is a modern material that visually resembles an array of wood, which has the same natural color and pattern. It is very difficult to distinguish such a door from a natural door, which is made of an array of valuable wood species, although the price of the door is quite acceptable. The advantages of the laminated door can be called economy, sufficient strength, ease of further care of it, as well as its decorativeness. There are also disadvantages – laminated doors are not recommended on the doors intended for the street, because they do not have resistance to moisture, as well as temperature differences, nah has a very weak heat – and sound insulation.3. Door panels from MDF, which is a modern material made by compression of wood chips and the use of synthetic resins. Such panels are both beautiful and environmentally friendly, to everything they are very durable. You can call several types of MDF panels: – laminated MDF panels, panels covered with PVC with a film, in order to give them wear resistance, as well as endowing them with a natural wood pattern; – veneered MDF – panels covered with plates of wood of valuable wood of wood; – painted MDF – panels covered in several layers with paint. The advantages of doors with panels from MDF can be called their resistance to moisture, a rich variety of their decor, quite a low cost. Disadvantages, the same as the previous coating – not the possibility of using them for street doors; very low heat – and sound insulation.4. The tree of the tree is the most expensive type of door finish, but it gives the door an impressive, luxurious view. The advantages of the decoration of the wood massage are not only heat – and sound insulation, but also resistance to high humidity, temperature differences, excellent wear resistance. Such coatings lend themselves well to repair, and in the case of their accidental damage, they do not require replacing the entire finish material – it is enough to replace only the damaged part. A huge selection of colors will not make you doubt the choice for a long time, as well as their respectable view. The disadvantages are obvious – a very high cost, in addition, they need constant care.5. Powdered doors painting is carried out by applying a special powder paint made on a steel door, which is finished for painting, made of synthetic materials. The advantages of the steel door, with the finishing of the paint – simplicity of finishing, good wear resistance, durability, resistance to high humidity, temperature differences, all these factors make it suitable for use in the decoration of street doors. Disadvantages – peeping seams, in the places of junction of metal.