Currently, halogen spotlights are used to cover the entrances in a variety of rooms (residential or production), terraces, storage facilities. In addition, they are used to illuminate advertising windows and some fragments of the area.
General characteristic:
– Halogen lamps are made of special aluminum casting with a steel console content.
– Installation does not require a large cost of energy, it is quite simple.
– You can independently set the reflector direction.
– Optimal illumination is carried out thanks to the built -in high -class reflector, which is made of aluminum.
– From the external influence of adverse factors protects a fairly strong glass.
– High level of mechanical strength.
By power, they are: 100, 200, 500, 1000, as well as 1500 watts.
Recently, halogen spotlights with a motion sensor have been in great demand.
Let us consider in more detail their parameters:
– Infrared sensor can be adjusted in only two planes, namely horizontally and vertical.
– There are three main regulators. They exercise time control, sensitivity, and, of course, the degree of illumination.
– The maximum distance of the sensor is 12 meters.
The distance from a particular illuminated object should be at least 1m.
Linear halogen lamps are used
As for the supply voltage, it should not exceed 220V. The amplitude of the operating temperature ranges from –20 ° C to +40 ° C.
It is used to illuminate the internal and external objects of the room or building.
For lighting the premises, built -in ceiling lamps are used. The principle of construction is as follows: a light bulb with a cartridge and special reinforcement, thanks to which there is a connection to the network, as a result of which a bright glow appears. Lamps are divided into several types:
– The lamps are suspended. Pay attention to the fact that they are attached to the ceiling, but at the same time a small distance is left between the plane and the device.
– Built -in – installed exclusively in suspended and multi -level ceilings.
Lamps of overheads – unlike built -in, they also have sidewalls. In turn, they are divided into subgroups: lamps with the presence of a diffuser, as well as a mirror reflector.
Such designs are very convenient to operate.
