The process of plaster of the ceiling and walls is simple. But to add bright unusual colors to the living room and give it the current look, you can use artistic plaster.
Textured plaster on the ceiling makes it possible to perform different relief images.
Preparation for plaster.
Before plaster, you need to prepare a room, covering furniture items and protecting them from dust and dirt. Apply a primer mixture to the place of coating to prepare the ceiling surface. The primer will make it possible to remove holes and “ceiling defects of cracks. To do this, it is better to use:
roller;
spray.
Nanisen of plaster with a roller.
To do this, you need to purchase a roller for painting work. Textured farb or liquefied gypsum solution is applied to the roller and the ceiling surface is smeared.
The main thing: you need to look so that small lumps do not form in the coloring procedure.
Drinking of the plaster sprayer “The fastest and most convenient option for plaster. Direct the nozzle with a spray solution to the ceiling and start the plaster process.
The main thing: the decoration of the ceiling can start after a good drying of the layer of plaster.
Nanisenia on a textured basis.
For ceiling decoration, specialized textured plaster of dry shape is used. It is bred in the water until a saturated composition is obtained.
The perfectly mixed prepared plaster layer is applied with a spatula on the ceiling surface with strips, from one corner to the other in a half -perimeter. On a wet layer of plaster, a pattern is made using a embossed roller, a triangular non -shaped spatula or brush that has a solid pile.
Attention: you need to make patterns quickly until the plaster layer remains wet.3. A second strip of plaster layer is applied, after which the pattern is made on it. It is recommended: turn off the equipment for heating during operation, close the windows and windows.
Textured effects:
For the manufacture of a textured result, it is necessary to carry out a roller with a long pile according to a wet layer of plaster, and triangular with a spatula or brush to make circular movements along the surface of the ceiling in different directions. So you can make a pattern in the form of circles or under wood. Using a plastic grater and performing progressive movements on the ceiling, you can make a pattern in the form of direct grooves.
It is important to know: deep reliefs can be desired using a spatula.
You can perform a more enchanting and unusual pattern: the main part of the ceiling is fraudulently dash, and glue the trellises on the remaining surface.
What you need to know about plaster:
The process of drying the plastering mother will depend on its type. For decorative coating, this time is at least 7 days.
After the plaster has completely dried on a textured basis, the ceiling can be varnished or paint to give an enchanting look.
To give plaster a specific shade, you can add a little paint to the mother.
Silk Plaster silky plaster for decorative work – ceiling trim with your own hands
